CoreEP4CE6, Отладочная плата с EP4CE6E22C8N

Overview

CoreEP4CE6 is an FPGA core board that features an EP4CE6E22C8N device onboard, supports further expansion.

• onboard Serial Configuration Device EPCS16SI8N
• integrated FPGA basic circuit, such as clock circuit
• onboard nCONFIG button, RESET button, 4 x LEDs
• all the I/O ports are accessible on the pin headers
• onboard JTAG debugging/programming interface
• 2.54mm header pitch design, suitable for being plugged-in your application system

What's On Board

1. EP4CE6E22C8N:the ALTERA Cyclone IV FPGA device which features:
   • Operating Frequency:50MHz
   • Operating Voltage:1.15V～3.465V
   • Package:QFP144
   • I/Os:80
   • LEs:6K
   • RAM:270kb
   • PLLs:2
   • Debugging/Programming: supports JTAG
2. AMS1117-3.3, 3.3V voltage regulator
3. AMS1117-2.5, 2.5V voltage regulator
4. AMS1117-1.2, 1.2V voltage regulator
5. EPCS16, onboard serial FLASH memory, for storing code
6. Power indicator
7. LEDs
8. Reset button
9. nCONFIG button: for re-configuring the FPGA chip, the equivalent of power reseting
10. Power switch
11. 50M active crystal oscillator
12. 5V DC jack
13. JTAG interface: for debugging/programming
14. FPGA pins expander, VCC, GND and all the I/O ports are accessible on expansion connectors for further expansion
15. LED jumpers

Photos

Note:CoreEP4CE6 provides JTAG debugging interface, yet does NOT integrate any debugging function, a debugger is required.Mother board and programmer/debugger in the photos are NOT included in the price.

JTAG Interface

The figure below shows the header pinout of JTAG

Figure 1. JTAG Header Pinout

Development Resources

• Related software (Quaters II, NIOS II etc.)
• Demo code (Verilog, VHDL, NIOS II C)
• Schematic (PDF)
• FPGA development documentations

Wiki:www.waveshare.com/wiki/CoreEP4CE6