Ориентировочная стоимость (Время доставки и итоговая стоимость согласуются индивидуально с каждым клиентом):
Товар весом до 10 кг - 500 ₽
Товар весом свыше 10 кг - 800 ₽
Стоимость доставки зависит от города назначения и размера посылки. Вы можете самостоятельно рассчитать стоимость доставки на сайтах транспортных компаний.
Выдача товара производится согласно графика работы:
Пн-Чт: с 9:00 до 18:00
Пт: с 9:00 до 17:00
Обед с 13:00 до 14:00 - выдача товара не производится.
Вы можете оплатить заказ следующими способами:
Uninterruptible Power Supply, Powering the CM4 While Recharging
UPS Base Board
UPS Mini-Computer Kit In addition to the UPS Base Board, it is equipped with Aluminum Alloy case, fan and power supply adapter
CM4 socket | suitable for all variants of Compute Module 4 |
---|---|
Battery support | parallel 18650 Li-ion battery × 3 (NOT included) |
Networking | Gigabit Ethernet RJ45 connector, integrates 802.3af-compliant PoE circuit (5V/2.5A) |
USB | USB 2.0 Type A × 4 |
Connector | Raspberry Pi 40PIN GPIO header |
M.2 M KEY slot, for connecting NVME SSD, or communication module with PCIE M.2 M KEY interface | |
Display | MIPI DSI port × 1 (22pin 0.5mm FPC connector) |
Camera | MIPI CSI-2 port × 2 (22pin 0.5mm FPC connector) |
Video | HDMI × 2, supports 4K 30fps output |
RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
Storage | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
Fan | allows speed adjustment and measurement, 5V / 12V |
Indicator | M.2 status LED CM4 status LED |
Power input | 7-36V |
Dimensions | 175.0 × 108.0mm |
standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO headersuitable for Compute Module 4 Lite/eMMC series module
* for reference only, CM4 is NOT included
It is able to charge the batteries and provide power output for the system at the same time from external power supplyAutomatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble
Dynamic path management, more stable power supply
Protection circuits for over charge/discharge, over current, short circuit, and reverse-proofalong with the standalone resettable fuse for each battery, more safe and stable
monitoring the batteries voltage, current, power, and remaining capacity via I2C
When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss
Each Cut-Out Is Completely Aligned With The Connector
Comes With Cooling Fan, Combined With The Airflow Vent, Better Heat Dissipation
Wall Mount Holes On Two Sides, Handy For Mounting
Suitable For Raspberry Pi Applications requiring Binocular Vision Or Other Industrial Context
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
CM4 Base Board | Interface count and specifications | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
PoE | Gigabit ETH | 40PIN GPIO | PCIe | USB① | DSI | HDMI | CSI | RTC | Fan Header | Power Input | Features | |
![]() | √ | 2.0×1 | ×1 | 5V | CM4 sized | |||||||
![]() | ×1 | √ | 2.0×1 | ×1 | ×1 | ×1 | 5V | CM4 sized | ||||
![]() | √ | 2.0×1 | ×1 | ×1 | ×1 | 5V | Onboard Camera | |||||
![]() | M.2 M | 2.0×1 | ×1 | ×1 | 5V | Arduino compatible | ||||||
![]() | ×1 | √ | M.2 M | 2.0×4 | ×1 | ×2 | ×2 | 5V | 5V | mini size | ||
![]() | ×1 | √ | M.2 M | 2.0×4 | ×1 | ×2 | ×2 | √ | 5V | 5V | mini size | |
![]() | ×1 | √ | M.2 M | 2.0×2 | ×1 | ×2 | √ | 5V | 5V | Dedicated 40PIN LCD Connector | ||
![]() | ×1 | M.2 M | 2.0×4 | ×1 | ×1 | 5V | IPS screen | |||||
![]() | ×2 | √ | 2.0×1 | 5V SH1.0 | 5V | dual ETH | ||||||
![]() | ×1 | √ | M.2 M | 2.0×4 | ×2 | 5V | dual 8MP cameras | |||||
![]() | ×1 | 2.0×2 | ×1 | ×2 | ×1 | 5V | 7-36V | dual ETH | ||||
![]() | ×1 | √ | M.2 E | 2.0×3 | ×1 | ×2 | ×2 | ×1 | 5/12V | 7-36V | WIFI6 dual ETH | |
![]() | ×2 | √ | 3.0×3 | ×1 | ×2 | ×2 | √ | 5/12V | 7-36V | |||
![]() | ×2 | √ | 3.0×2 | ×1 | ×2 | ×2 | √ | 5/12V | 5V | 5G/4G support | ||
![]() | √ | ×1 | Gen2×1 | 2.0×2 | ×2 | ×2 | ×2 | √ | 5/12V | 7-36V | 5G/4G supportRS232RS485ADC | |
![]() | √ | ×1 | √ | Gen2×1 | 2.0×4 | ×2 | ×2 | ×2 | √ | 5/12V | 5V | RS232RS485 |
![]() | √ | ×1 | √ | M.2 M | 2.0×4 | ×1 | ×2 | ×2 | √ | 5/12V | 7-36V | UPS |
![]() | √ | ×1 | √ | 3.0×4 | ×2 | ×2 | ×2 | √ | 5/12V | 7-36V | ||
![]() | ② | ×1 | √ | Gen2×1 | 2.0×4 | ×2 | ×2 | ×2 | √ | 12V | 12V | |
![]() | ×1 | M.2 B / Mini-PCIe | 2.0×3 | ×1 | ×1 | √ | 5/12V | 5V or 7-36V | 5G/4G support RS485 CAN rail-mount | |||
![]() | ② | ×1 | √ | M.2 M | 2.0×4 | ×1 | ×2 | √ | 5/12V | 5V | ||
![]() | ×1 | M.2 M | 2.0×4 | used | ×1 | used | √ | 5/12V used | 7-36V | touch screen camera speaker | ||
Note | ① USB 3.0 is equivalent to USB 3.2 Gen1 ② There's PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A). |
SAFETY CAUTIONS