Ориентировочная стоимость (Время доставки и итоговая стоимость согласуются индивидуально с каждым клиентом):
Товар весом до 10 кг - 500 ₽
Товар весом свыше 10 кг - 800 ₽
Стоимость доставки зависит от города назначения и размера посылки. Вы можете самостоятельно рассчитать стоимость доставки на сайтах транспортных компаний.
Выдача товара производится согласно графика работы:
Пн-Чт: с 9:00 до 18:00
Пт: с 9:00 до 17:00
Обед с 13:00 до 14:00 - выдача товара не производится.
Вы можете оплатить заказ следующими способами:
All-in-one, More convenient, Space efficient
Low Noise, More Practical, With Thermal Tapes
Supported Pi | Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version |
---|---|
Power supply | DC 5V input (can be powered from Raspberry Pi) |
INTERFACE | 3-wire PWM speed-adjustable fan header |
rated power | 0.3W (5V, 0.06±0.02A) |
Cable length | 80±10mm |
Fan | 5500±10%RPM |
Cooling The Raspberry Pi 4B (Left) And Raspberry Pi 4B With FAN Adapter (Right)
attaching other Raspberry Pi HATs via the FAN adapter
Matching With The Pi 4B On Size And Mounting Holes, Fast Heat Dissipation, Lightweight and silent
1. Paste thermal pad to Raspberry Pi 4B as shown
2. Fix PI4-FAN-PWM with screws from the back of the Raspberry Pi
3. Connect the cables to GPIO. Red cable to 5V. Black to GND and Blue one to PWM pin(TXD/GPIO12/GPIO18 selectable)
4. When used with FAN Adapter, connect the cable as picture above, the default PWM pin is D12(GPIO12) ,You can switch to TXD or D18(GPIO18) by modifying the 0R resistor.