Ориентировочная стоимость (Время доставки и итоговая стоимость согласуются индивидуально с каждым клиентом):
Товар весом до 10 кг - 500 ₽
Товар весом свыше 10 кг - 800 ₽
Стоимость доставки зависит от города назначения и размера посылки. Вы можете самостоятельно рассчитать стоимость доставки на сайтах транспортных компаний.
Выдача товара производится согласно графика работы:
Пн-Чт: с 9:00 до 18:00
Пт: с 9:00 до 17:00
Обед с 13:00 до 14:00 - выдача товара не производится.
Вы можете оплатить заказ следующими способами:
Supports GPS, Beidou(BDS), Glonass, QZSS
UART communication, provides multi-platform resources and tutorials for secondary development and integration
TheL76K GPS Module is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS and QZSS systems, allows multi-system combined or single-system independent positioning. Supports AGNSS function, built-in low-noise amplifier and sound surface filter, provides a good positioning experience of fast, accurate, high-performance.
Product | L76K | L76B | |
---|---|---|---|
GNSS | GPS/GLONASS/BDS/QZSS | GPS/BDS/QZSS | |
Chip Platform | AT6558R | MT3333(Discontinued) | |
L1 Band Receiver | Channels | 32 tracking ch/ 72 acquisition ch | 22 Tracking ch/66 acquisition ch |
SBAS | N/A | Support | |
A-GNSS | Support | Support | |
Sensitivity | Acquisition | -148dBm | -148dBm |
Re-acquisition | -160dBm | -160dBm | |
Tracking | -162dBm | -163dBm | |
TTFF (Time to first fix) | Cold starts | 30s, Autonomous 5.5s, With AGNSS | 35s, Autonomous 15s, with EASY™ |
Warm starts | - | 30s, Autonomous 5s, with EASY™ | |
Hot starts | 2s | 1s | |
Position accuracy | 2.0m CEP | 2.5m CEP | |
Speed accuracy | 0.1m/s | 0.1m/s | |
Acceleration accuracy(Max) | 0.1m/s² | 0.1m/s² | |
Timing accuracy | 30ns | 10ns | |
Update Rate (Max) | 5Hz | 10Hz | |
Default baudrate | 9600bps | 9600bps |
Provides Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino/STM32 demos and user manuals, easier to develop and integrate, and better expansibility
supports GPS, Beidou(BDS), Glonass, QZSS
Pinout definition | |
---|---|
VCC | Power supply (3.3V/5V) |
TX | Connect to MCU.RX (Signal direction: TX >> MCU.RX) |
RX | Connect to MCU.TX (Signal direction: MCU.TX >> RX) |
PPS | GPS status indicator |
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.