Ориентировочная стоимость (Время доставки и итоговая стоимость согласуются индивидуально с каждым клиентом):
Товар весом до 10 кг - 500 ₽
Товар весом свыше 10 кг - 800 ₽
Стоимость доставки зависит от города назначения и размера посылки. Вы можете самостоятельно рассчитать стоимость доставки на сайтах транспортных компаний.
Выдача товара производится согласно графика работы:
Пн-Чт: с 9:00 до 18:00
Пт: с 9:00 до 17:00
Обед с 13:00 до 14:00 - выдача товара не производится.
Вы можете оплатить заказ следующими способами:
supports USB, UART/RS232/RS485 communication4G/3G/2G dial-up & GNSS positioning, global band support
Supports communication between USB / serial port (UART/RS232/RS485) and 4G network, supports GNSS positioning, compatible with OS like Windows/Linux.An ideal choice for fields like Raspberry Pi project, industrial control, industrial data collection, and other IoT applications that require 4G network connection.
Frequency band | |
---|---|
4G | LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD: B34, B38, B39, B40, B41 |
3G | UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19 |
2G | GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz |
GNSS | GPS, Beidou, GLONASS, GALILEO, QZSS |
Applicable regions | Global support |
Data rate | |
4G (LTE Cat-4) | 150Mbps(DL) / 50Mbps(UL) |
3G (HSPA+) | 42Mbps(DL) / 5.76Mbps(UL) |
2G (EDGE) | 236.8Kbps(DL) / 236.8Kbps(UL) |
2G (GPRS) | 85.6Kbps(DL) / 85.6Kbps(UL) |
Software features | |
Communication protocol | TCP, IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNS (controlled via AT commands, with module Open Linux SDK for secondary development) |
OS support | Windows/Linux etc. |
Hardware description | |
Serial port | RS232: connector: DB9 female protection: TVS protection, anti-surge, ESD protection |
RS485: connector: screw terminals (A, B) protection: 600W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R balancing resistor solder pads) | |
TTL(UART): operating voltage: 3.3V or 5V connector: screw terminals (TXD, RXD, GND) | |
Serial port baudrate | supports 300bps ~ 921600bps, 115200bps by default |
USB port | operating voltage: 5V connector: Micro USB protection: ESD protection diode usage: parameter configuration, dial-up, firmware upgrade |
Power input | connector: 7~36V screw terminals or DC 12V jack protection: Schottky diode protection, reverse-proof |
Hardware protection | embedded MCU, hardware watchdog to prevent system crash, industrial grade aluminum alloy case |
Operating voltage | 7 ~ 36V DC |
Operating current | idle: 10~30mA @12V |
transmit: 80~450mA @12V (depending on the network condition) | |
Indicator | PWR (power supply), RXD/TXD (UART RX/TX), NET (network), LINK (user-defined) |
Button | reset button |
SIM card | standard SIM card (1.8V / 3V) |
Antenna connector | MAIN LTE, AUX LTE, GNSS |
Operating temperature | -40℃ ~ 80℃ |
connect to the host via USB, install driver, the high speed 4G connection will be ready to use
supports GPS, BeiDou, Glonass, GALILEO, QZSS, LBS base station
supports USB/UART communication interfacessupports TCP/UDP/FTP/FTPS/HTTP/HTTPS communication protocols
the module comes with SIMCom AT firmware by default, while Open Linux SDK is also available for developing your own software function
high gain LTE MAIN antenna: magnetic base, waterproof, supports outdoor usage through extension cablehigh gain LTE AUX antenna: for signal enchantment, speeding up the data rateGPS antenna: 28±2dB gain, IP65~IP67 waterproof
monitoring the connection and signal status in real time